It allows cutting sheet metal on the machine. The corpus of the knife is made of steel, covered with dry power laquer, other elements are covered with zinc. The cutting rollers are made of high-alloy steel which allows for the longlasting and exact cutting (There is a p [...]
140 PLN net
SPANNERS KIT TO ADJUST THE MACHINE 70ZŁ + FIRST AID KIT
It is possible to purchase spare cutting rollers in case of damage or sharpening of the rollers. One set consists of dwo rollers: upper and lower. The discs are placed in bearing which simplifies their exchange. Durability of the discs is very big. If the rollers are u [...]
This machine is structually identical with ZRS-2160 but the working length has been extended till 2350 mm upon roofers' requests. Thanks to this, machine is more convenient in use and workers have more possibilities in standard diagonal sheet treatment (1000 x [...]
It allows for comfortable moving the sheet metal and its cutting. The convenient fasteners were used in this device. This device is transported in the same bag as the back table.
Attention! Depending on the model of the bending machine, the extension of the back table [...]
It is used for propping up the back table or the extension of the table to prevent them from excessive load. It is easy to assemble and disassemble. The bag for the table can also be used to transport this device. The support is equipped with wheels which make them eas [...]
If the bending machine is not equipped with the back table, back fenders can be bought independently. That lowers the purchasing cost siginifcantly. Back fenders are fast-fixing aluminium span with scale of 1000 mm and movable fenders.
ATTENTION! BACK FENDERS WITH MOVA [...]
105 PLN net
SINGLE POSITION PLATE ANGLE LIMITER (Ranged 0° - 160º)
It enables repetetive bending angle of sheet metal in a lot production. Setting of this device is very simple and fast. The range of the setting is between 0 and 160 degrees. The adjustment can be speeded up by looking at the bending angle disc while raising the bend [...]
290 PLN net
FOUR ANGLE LIMITERS OF BENT PLATE (Ranged 4x 0º - 160º)
The technology of setting the limiter is identical as in signle position bent plate angle limiter. This device is adapted for setting simultaneously four different angles in the range of 0 to 160 degrees. The change of the position of the limiters changes when roofer [...]
It enables worker to control visually the angle of sheet metal bending or bending beam. This device expedites the setting of the single position bent plate angle limiter and the four limiters of bent plate. To set the correct angle, raise the bending beam to the neede [...]
They are used for sheet metal striped cutting. The range of the cutting is between 0 mm and 400 mm. There is a possibility to produce longer limiters upon customer's request. The limiters are equipped with the wind-up measuring tape which can be easily changed when us [...]
210 PLN net
STEP-ON WOODEN PLATFORM (Prevents machine from moving)
It revents the roofer from the harmful effects of wet and cold ground. The main function of the platform is the elimination of the movements of the machine. It is worker’s weight that make the machine stand still during the work (especially during the final phase of ben [...]
72 PLN net
SIDE HANDLE (1 pc.) (Allows bending the sheet metal from the side of the machine)
They are located on the edges of the bending beam. The application of the catches eliminated onerous screwing down and unscrewing. Side handles are used for bending of sheet metal which is so large that there is no access to the horizontal lever of the bending beam. A [...]
They are useful for roofers who work alone. When the roofer uses pedals he/she does not have to stop the work and walk to the closing handles to open the machine because he/she can do it with foot. When one presses down the sheet metal with pedals he/she does not let g [...]
The machine can be equipped with the device which, with low additional costs, eliminates the costs of buying an expensive segmental bar folder. There are two elements which raises the upper beam to the arbitrary height (but not higher than 90 mm). For example, you have [...]
It prevents cut sheet metal strips against falling down on step-on platform and worker’s feet. The clamping bar is located on the front limiters at knee-level. It is made of wood. There is a possibility to widen the bar when the metal strips are wider. This device is [...]
0 PLN net
LOCK FOR LOCKING THE MACHINE (Enclosed to the machine)
They allow for regulation of the right angle in relation to knife cutting the sheet metal. The regulation is simplified by an arm close-coupled with two spans which set the side fenders of the sheet metal angle by moving it forward and back. [...]
Projected price of the device: 4100 PLN net
About the product
This machine is structually identical with ZRS-2160 but the working length has been extended till 2350 mm upon roofers' requests. Thanks to this, machine is more convenient in use and workers have more possibilities in standard diagonal sheet treatment (1000 x 2000 mm). ZRS-2360 - Bending machine created upon roofers' request - it allows for diagonal bending and cutting of the standard metal sheet.
Max thickness bending steel
Max thickness bending titanium - zinc
Max thickness bending aluminum
Max thickness bending copper
Max thickness bending stainless steel
Rzetelna Firma Program is the largest and most prestigious enterprise promoting reliable traders in Poland. The aim of this program is to propagate legit precepts in trade. Participation in this program certifcates the highest standards in enterpise activity.
Polskie Stowarzyszenie Dekarzy is a labour organization which associate craftsmen performing roofing tasks. This association organises members making flat and peaked roofs as ordinary contractors and producers of roofing materials, products and tools as supporting members.