It allows cutting sheet metal on the machine. The corpus of the knife is made of steel, covered with dry power lacquer, other elements are covered with zinc. The cutting rollers are made of high-alloy steel which allows for the long-lasting and exact cutting (There is a [...]
0 PLN net
Selected equipment:
SPANNERS KIT TO ADJUST THE MACHINE 70ZŁ + FIRST AID KIT
It is possible to purchase spare cutting rollers in case of damage or sharpening of the rollers. One set consists of dwo rollers: upper and lower. The discs are placed in bearing which simplifies their exchange. Durability of the discs is very big. If the rollers are u [...]
0 PLN net
Selected equipment:
(HEAVY) BACK TABLE 1 m. (+back fenders with a scale +bag)
It is made of the steel profiles, fixed to the convenient fasteners. Two profiles are equipped with fenders of a 1000 mm scale. That fenders are used for the repetitive bending or cutting. Additionally, there are wooden elements equipped with fasteners between the profi [...]
0 PLN net
Selected equipment:
(HEAVY) SINGLE POSITION PLATE ANGLE LIMITER (Ranged 0 - 160º)
It enables repetitive bending angle of sheet metal in a lot production. Setting of this device is very simple and fast. The range of the setting is between 0 and 160 degrees. The adjustment can be speeded up by looking at the bending angle disc while raising the bendi [...]
0 PLN net
Selected equipment:
(HEAVY) FOUR ANGLE LIMITERS OF BENT PLATE (Ranged 4x 0º - 160º)
The technology of setting the limiter is identical as in single position bent plate angle limiter. This device is adapted for setting simultaneously four different angles in the range of 0 to 160 degrees. The change of the position of the limiters changes when roofer t [...]
NEW!
Despite its price, this model is gaining more and more popularity. It was created upon customers' suggestions. Modifications streamlining its work and functionality are ceaselessly implemented.
Totally new! Bending machine for the most demanding customers. W [...]
They are used for sheet metal striped cutting. The range of the cutting is between 0 mm and 400 mm. There is a possibility to produce longer limiters upon customer's request. The limiters are equipped with the wind-up measuring tape which can be easily changed when use [...]
0 PLN net
Selected equipment:
(HEAVY) STEP-ON WOODEN PLATFORM (Prevents machine from moving)
It prevents the roofer from the harmful effects of wet and cold ground. The main function of the platform is the elimination of the movements of the machine. It is worker’s weight that make the machine stand still during the work (especially during the final phase of be [...]
They are located on the edges of the bending beam. The application of the catches eliminated onerous screwing down and unscrewing. Side handles are used for bending of sheet metal which is so large that there is no access to the horizontal lever of the bending beam. An [...]
It prevents cut sheet metal strips from falling down on step-on platform and worker’s feet. The clamping bar is located on the front limiters at knee-level. It is made of wood. There is a possibility to widen the bar when the metal strips are wider. This device is a v [...]
0 PLN net
Selected equipment:
(HEAVY) LOCK FOR LOCKING THE MACHINE (Enclosed to the machine)
The machine can be equipped with the device which, with low additional costs, eliminates the costs of buying an expensive segmental bar folder. There are two elements which raises the upper beam to the arbitrary height (but not higher than 90 mm). For example, you have [...]
0 PLN net
Selected equipment:
(HEAVY) BACK FENDERS (2 pcs.) WITH A SCALE 1000 mm.
If the bending machine is not equipped with the back table, back fenders can be bought independently. That lowers the purchasing cost siginifcantly. Back fenders are fast-fixing aluminium span with scale of 1000 mm and movable fenders.
ATTENTION! BACK FENDERS WITH MOVA [...]
They allow for regulation of the right angle in relation to knife cutting the sheet metal. The regulation is simplified by an arm close-coupled with two spans which set the side fenders of the sheet metal angle by moving it forward and back. [...]
Convenient solution thanks to whichall measuring tools and other useful accessories at in one place. This item is fully rotating. [...]
Projected price of the device: 0 PLN net
About the product
NEW!
Despite its price, this model is gaining more and more popularity. It was created upon customers' suggestions. Modifications streamlining its work and functionality are ceaselessly implemented.
Totally new! Bending machine for the most demanding customers. Working length - 2150mm! It is designed for untypical tasks. For the construction of this machine, blue-ribbon material was used. Thanks to that, the machine retains its bending and cutting parameters even when 2 mm-thick steel sheet metal is used.
